---
title: "OT supported protocols | Lansweeper Classic"
slug: "ot-supported-protocols"
description: "See which protocols Lansweeper OT supports for scanning operational technology devices, so you know which vendors and devices you can discover."
updated: 2026-06-17T09:43:26Z
published: 2026-06-17T09:43:26Z
canonical: "docs.lansweeper.com/ot-supported-protocols"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.lansweeper.com/llms.txt
> Use this file to discover all available pages before exploring further.

# OT supported protocols

Lansweeper OT allows you to scan various vendors' devices with supported protocols.

Various protocols are supported by default, but you can also add protocol configurations as necessary.

For an overview of Lansweeper OT, see [Lansweeper for OT Asset Management](https://www.lansweeper.com/use-cases/ot-asset-management/).

## Supported protocols

The table below shows a list of supported protocols, as well as associated vendors and their devices.

Some vendors may be supported that are not listed, so long as they use a supported protocol.

You can also view a list of supported protocols in the **Hub > Protocols**.

OPC UA is supported by multiple vendors.

| **Vendor** | **Devices** | **Protocols** |
| --- | --- | --- |
| ABB |  | EtherNet/IP IEC-61850 |
| Alerton | ACM-GC Compass | BACnet |
| Automated Logic | G5RE WC20 | BACnet |
| Beckhoff |  | Profinet TwinCAT ADS |
| Delta Controls | DSC1212E DSC1616E DSM RTR eBCON eBMGR | BACnet |
| Distech Controls | ECY-303 ECY-S1000 ECY-S1000 ECY-TU203 | BACnet |
| Emerson/GE | PACSystems RSTi-EP PACSystems RX3i PACSystems RX7i Versamax | SRTP |
| Fanuc |  | Profinet |
| GE |  | IEC-61850 |
| Itron |  | IEC-61850 |
| Johnson Controls | MS-NCE2560-0 | BACnet |
| Lantronix | UDDS2100​ UDS200​ UDS1100​ xPico Series​ xPort Series​ xPress Series​ | Lantronix |
| Mitsubishi Electric | Melsec iQ-R Series​ Melsec L Series​ Melsec Q Series​ | IEC-61850 Melsec Profinet |
| Moxa | ioLogik E1200 Series (EtherNet/IP)​ NPort 5100 Series​ NPort 5200 Series NPort 5400 Series NPort 6100 Series​ NPort 6200 Series​ | EtherNet/IP Moxa Profinet |
| Omron | CJ1G Series CJ1M Series CJ2H Series CJ2M Series CP1H Series CP1L Series CP2E Series CS1H Series NJ Series NSJ Series | EtherNet/IP Fins Profinet |
| Phoenix Contact | AXC Series ILC Series | EtherNet/IP PCWorx Profinet |
| Reliable Controls | Mach Pro | BACnet |
| Rockwell | Armorblock CompactLogix ControlLogix FlexLogix Kinetix MicroLogix PanelView PLC-5 Powerflex SLC 500 Smartguard | EtherNet/IP Profinet |
| Schneider Electric | HMIG Series (Modbus) Magelis XBTGT Modicon M221 Modicon M258 Modicon M262 Modicon M340 Modicon M580 Modicon Quantum | BACnet EtherNet/IP IEC-61850 Modbus Profinet |
| SEL |  | EtherNet/IP IEC-61850 |
| Siemens | ET200 ET200S IM361 S7-1200 Series S7-1500 Series S7-300 Series S7-400 Series Simatic PLCs Sinumerik | BACnet EtherNet/IP IEC-61850 Profinet Siemens S7-300/400​ Siemens S7-1200/1500 |
| Tridium | Niagara 4 Niagara AX | BACnet |
| Vipa | 300 series | Siemens S7-300/400​ Siemens S7-1200/1500 |
| Wago |  | Profinet |

## Add protocol configurations

You can create a custom protocol configuration to scan your OT devices, if necessary.

To add a protocol configuration:

1. In the Hub, go to **Protocols.**
2. Select **Add new**.
3. Enter a name and protocol.
4. Enter the advanced configuration details.
5. Select **Save**.

Don't see the protocol you need? Please [complete this request form](https://az5krgaymnz.typeform.com/to/qC77NLXm) and we'll contact you!