Lansweeper OT allows you to scan various vendors' devices with supported protocols.
Various protocols are supported by default, but you can also add protocol configurations as necessary.
For an overview of Lansweeper OT, see Lansweeper for OT Asset Management.
Supported protocols
The table below shows a list of supported protocols, as well as associated vendors and their devices.
Some vendors may be supported that are not listed, so long as they use a supported protocol.
You can also view a list of supported protocols in the Hub > Protocols.
OPC UA is supported by multiple vendors.
| Vendor | Devices | Protocols |
|---|---|---|
| ABB | EtherNet/IP IEC-61850 | |
| Alerton | ACM-GC Compass | BACnet |
| Automated Logic | G5RE WC20 | BACnet |
| Beckhoff | Profinet TwinCAT ADS | |
| Delta Controls | DSC1212E DSC1616E DSM RTR eBCON eBMGR | BACnet |
| Distech Controls | ECY-303 ECY-S1000 ECY-S1000 ECY-TU203 | BACnet |
| Emerson/GE | PACSystems RSTi-EP PACSystems RX3i PACSystems RX7i Versamax | SRTP |
| Fanuc | Profinet | |
| GE | IEC-61850 | |
| Itron | IEC-61850 | |
| Johnson Controls | MS-NCE2560-0 | BACnet |
| Lantronix | UDDS2100 UDS200 UDS1100 xPico Series xPort Series xPress Series | Lantronix |
| Mitsubishi Electric | Melsec iQ-R Series Melsec L Series Melsec Q Series | IEC-61850 Melsec Profinet |
| Moxa | ioLogik E1200 Series (EtherNet/IP) NPort 5100 Series NPort 5200 Series NPort 5400 Series NPort 6100 Series NPort 6200 Series | EtherNet/IP Moxa Profinet |
| Omron | CJ1G Series CJ1M Series CJ2H Series CJ2M Series CP1H Series CP1L Series CP2E Series CS1H Series NJ Series NSJ Series | EtherNet/IP Fins Profinet |
| Phoenix Contact | AXC Series ILC Series | EtherNet/IP PCWorx Profinet |
| Reliable Controls | Mach Pro | BACnet |
| Rockwell | Armorblock CompactLogix ControlLogix FlexLogix Kinetix MicroLogix PanelView PLC-5 Powerflex SLC 500 Smartguard | EtherNet/IP Profinet |
| Schneider Electric | HMIG Series (Modbus) Magelis XBTGT Modicon M221 Modicon M258 Modicon M262 Modicon M340 Modicon M580 Modicon Quantum | BACnet EtherNet/IP IEC-61850 Modbus Profinet |
| SEL | EtherNet/IP IEC-61850 | |
| Siemens | ET200 ET200S IM361 S7-1200 Series S7-1500 Series S7-300 Series S7-400 Series Simatic PLCs Sinumerik | BACnet EtherNet/IP IEC-61850 Profinet Siemens S7-300/400 Siemens S7-1200/1500 |
| Tridium | Niagara 4 Niagara AX | BACnet |
| Vipa | 300 series | Siemens S7-300/400 Siemens S7-1200/1500 |
| Wago | Profinet |
Add protocol configurations
You can create a custom protocol configuration to scan your OT devices, if necessary.
To add a protocol configuration:
- In the Hub, go to Protocols.
- Select Add new.
- Enter a name and protocol.
- Enter the advanced configuration details.
- Select Save.
Don't see the protocol you need? Please complete this request form and we'll contact you!